| Ant Task: sshexec | Ant Task: sshexec 2005-05-23 - By Anderson, Rob (Global Trade)
They can configure it either way. You want them to set it up so that you don't
need to enter a password. It can be done without compromising security. Another
possibility is to ssh to the server as the user that tomcat runs as. You can do
this without a password by using ssh key authentication. Or you could pass a
password into ant on the command line.
ant -Dpasswd=somepassword ...
Then in the build.xml...
<sshexec host="somehost"
username="${usernamethatrunstomcat}"
password="${passwd}"
command="do something"/>
Of course this is not as secure as using sudo or ssh key because the password
is visible on your screen when you type it.
-Rob A
> -----Original Message-----
> From: S I [mailto:xiamak@(protected)]
> Sent: Monday, May 23, 2005 2:02 PM
> To: user@(protected)
> Subject: RE: Ant Task: sshexec
>
>
> And with the tweaks set by the Admin... would sudo still
> prompt me for a
> password or seamlessly allow me to stop/start Tomcat? Thanks
> for your help
> Rob.
>
> Steven
>
> ----Original Message Follows----
> From: "Anderson, Rob (Global Trade)" <Rob.Anderson@(protected)>
> Reply-To: "Ant Users List" <user@(protected)>
> To: "Ant Users List" <user@(protected)>
> Subject: RE: Ant Task: sshexec
> Date: Mon, 23 May 2005 13:40:07 -0700
> MIME-Version: 1.0
> Received: from mail.apache.org ([209.237.227.199]) by
> MC6-F34.hotmail.com
> with Microsoft SMTPSVC(6.0.3790.211); Mon, 23 May 2005 13:40:28 -0700
> Received: (qmail 77095 invoked by uid 500); 23 May 2005 20:40:21 -0000
> Received: (qmail 77075 invoked by uid 99); 23 May 2005 20:40:21 -0000
> Received: pass (hermes.apache.org: local policy)
> Received: from nbarrierb241.nike.com (HELO barrierb241.nike.com)
> (146.197.27.40) by apache.org (qpsmtpd/0.28) with ESMTP;
> Mon, 23 May 2005
> 13:40:19 -0700
> X-Message-Info: JGTYoYF78jGL4xAfSBT13x6wAq4XrH2CWTAQhE33W58> Mailing-List:
contact user-help@(protected); run by ezmlm
> Precedence: bulk
> List-Unsubscribe: <mailto:user-unsubscribe@(protected)>
> List-Help: <mailto:user-help@(protected)>
> List-Post: <mailto:user@(protected)>
> List-Id: "Ant Users List" <user.ant.apache.org>
> Delivered-To: mailing list user@(protected)
> X-ASF-Spam-Status: No, hits=0.0 required.0tests> X-Spam-Check-By: apache.org
> X-Server-Uuid: BDE2CC8B-9671-48D4-9A25-CA756DA0A621
> X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0
> Content-class: urn:content-classes:message
> X-MS-Has-Attach:
> X-MS-TNEF-Correlator:
> Thread-Topic: Ant Task: sshexec
> Thread-Index: AcVf1uJQABnZCZHoRcaZKdgSMX4NmAAACJig
> X-OriginalArrivalTime: 23 May 2005 20:40:07.0442 (UTC)
> FILETIME=[9B159F20:01C55FD7]
> X-WSS-ID: 6E8CE02D2LC386083-01-01
> X-Virus-Checked: Checked
> Return-Path: user-return-50272-xiamak=hotmail.com@(protected)
>
> Your unix admin should be able to configure sudo to only allow you to
> execute the commands to stop and start tomcat. And with the
> permissions set
> correctly on the start and stop scripts there is no security
> risk. It's not
> like you are asking for root privileges.
>
> -Rob A
>
> > -----Original Message-----
> > From: S I [mailto:xiamak@(protected)]
> > Sent: Monday, May 23, 2005 1:31 PM
> > To: user@(protected)
> > Subject: RE: Ant Task: sshexec
> >
> >
> > OK, due to the limitations of the ant task <sshexec> and/or
> > unix's sudo
> > command, is there a unix utility which will allow me to make
> > a windows
> > system call <exec> over to a unix box and STOP Tomcat and
> > deploy my war
> > files?
> >
> > I'm currently invoking my build.xml from a Dos prompt; all
> > the pieces are
> > done, however, I can't stop or interact with the unix server
> > to stop Tomcat
> > w/o asking our Admin to surronder 'sudo' w/o password and
> > exposing our
> > security. Help!
> >
> > I need either a shell script or a utility which will
> > transmist and feed sudo
> > its password. There gotta be something out there.
> >
> > Thanks
> >
> > Steven
> >
> > ----Original Message Follows----
> > From: "Anderson, Rob (Global Trade)" <Rob.Anderson@(protected)>
> > Reply-To: "Ant Users List" <user@(protected)>
> > To: "Ant Users List" <user@(protected)>
> > Subject: RE: Ant Task: sshexec
> > Date: Thu, 19 May 2005 17:31:16 -0700
> > MIME-Version: 1.0
> > Received: from mail.apache.org ([209.237.227.199]) by
> > MC8-F34.hotmail.com
> > with Microsoft SMTPSVC(6.0.3790.211); Thu, 19 May 2005
> 17:31:34 -0700
> > Received: (qmail 33952 invoked by uid 500); 20 May 2005
> 00:31:26 -0000
> > Received: (qmail 33937 invoked by uid 99); 20 May 2005
> 00:31:26 -0000
> > Received: pass (hermes.apache.org: local policy)
> > Received: from nbarrierb241.nike.com (HELO barrierb241.nike.com)
> > (146.197.27.40) by apache.org (qpsmtpd/0.28) with ESMTP;
> > Thu, 19 May 2005
> > 17:31:25 -0700
> > X-Message-Info: JGTYoYF78jEfTrAn+9Ijq13nAndId/dbw8MXe74s5Xk> > Mailing
-List: contact user-help@(protected); run by ezmlm
> > Precedence: bulk
> > List-Unsubscribe: <mailto:user-unsubscribe@(protected)>
> > List-Help: <mailto:user-help@(protected)>
> > List-Post: <mailto:user@(protected)>
> > List-Id: "Ant Users List" <user.ant.apache.org>
> > Delivered-To: mailing list user@(protected)
> > X-ASF-Spam-Status: No, hits=0.0 required.0tests> > X-Spam-Check-By:
apache.org
> > X-Server-Uuid: BDE2CC8B-9671-48D4-9A25-CA756DA0A621
> > X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0
> > Content-class: urn:content-classes:message
> > X-MS-Has-Attach:
> > X-MS-TNEF-Correlator:
> > Thread-Topic: Ant Task: sshexec
> > Thread-Index: AcVc0vVSTdYpZfRHSTe1cWhXZLUDGAAABWxg
> > X-OriginalArrivalTime: 20 May 2005 00:31:16.0363 (UTC)
> > FILETIME=[3BF405B0:01C55CD3]
> > X-WSS-ID: 6E93F05E2H0277058-01-01
> > X-Virus-Checked: Checked
> > Return-Path: user-return-50229-xiamak=hotmail.com@(protected)
> >
> > Not possible. The sshexec task was not designed for any
> > interactivity. You
> > should configure sudo to allow you to execute the command without a
> > password.
> >
> > -Rob A
> >
> > > -----Original Message-----
> > > From: S I [mailto:xiamak@(protected)]
> > > Sent: Thursday, May 19, 2005 5:26 PM
> > > To: user@(protected)
> > > Subject: RE: Ant Task: sshexec
> > >
> > >
> > > I've run into a new problem with sshexec: How can I pass
> > > 'sudo' and its
> > > password to it? I've tested it in couple of different ways
> > > today to no
> > > avail. Help please! Thank you.
> > >
> > > Steven
> > >
> > > ----Original Message Follows----
> > > From: "S I" <xiamak@(protected)>
> > > Reply-To: "Ant Users List" <user@(protected)>
> > > To: user@(protected)
> > > Subject: RE: Ant Task: sshexec
> > > Date: Thu, 19 May 2005 15:34:37 -0700
> > > MIME-Version: 1.0
> > > X-Originating-IP: [206.173.244.27]
> > > X-Originating-Email: [xiamak@(protected)]
> > > X-Sender: xiamak@(protected)
> > > Received: from mail.apache.org ([209.237.227.199]) by
> > > mc10-f15.hotmail.com
> > > with Microsoft SMTPSVC(6.0.3790.211); Thu, 19 May 2005
> > 15:35:27 -0700
> > > Received: (qmail 62349 invoked by uid 500); 19 May 2005
> > 22:35:07 -0000
> > > Received: (qmail 62239 invoked by uid 99); 19 May 2005
> > 22:35:06 -0000
> > > Received: pass (hermes.apache.org: domain of
> > > xiamak@(protected) designates
> > > 65.54.245.18 as permitted sender)
> > > Received: from bay1-f18.bay1.hotmail.com (HELO hotmail.com)
> > > (65.54.245.18)
> > > by apache.org (qpsmtpd/0.28) with ESMTP; Thu, 19 May 2005
> > > 15:35:00 -0700
> > > Received: from mail pickup service by hotmail.com with
> > > Microsoft SMTPSVC;
> > > Thu, 19 May 2005 15:34:37 -0700
> > > Received: from 206.173.244.27 by by1fd.bay1.hotmail.msn.com
> > > with HTTP;Thu,
> > > 19 May 2005 22:34:37 GMT
> > > X-Message-Info: JGTYoYF78jEHjJx36Oi8+Z3TmmkSEdPt4iogl2abg+M> > >
Mailing-List: contact user-help@(protected); run by ezmlm
> > > Precedence: bulk
> > > List-Unsubscribe: <mailto:user-unsubscribe@(protected)>
> > > List-Help: <mailto:user-help@(protected)>
> > > List-Post: <mailto:user@(protected)>
> > > List-Id: "Ant Users List" <user.ant.apache.org>
> > > Delivered-To: mailing list user@(protected)
> > > X-ASF-Spam-Status: No, hits=1.7
> > > required.0tests=DNS_FROM_RFC_ABUSE,DNS_FROM_RFC_POST,MSGID_
> > > FROM_MTA_HEADER,SPF_HELO_PASS,SPF_PASS
> > > X-Spam-Check-By: apache.org
> > > X-OriginalArrivalTime: 19 May 2005 22:34:37.0421 (UTC)
> > > FILETIME=[F04239D0:01C55CC2]
> > > X-Virus-Checked: Checked
> > > Return-Path: user-return-50225-xiamak=hotmail.com@(protected)
> > >
> > > Ah great thanks. Why didn't I think of that? :)
> > >
> > > ----Original Message Follows----
> > > From: "Anderson, Rob (Global Trade)" <Rob.Anderson@(protected)>
> > > Reply-To: "Ant Users List" <user@(protected)>
> > > To: "Ant Users List" <user@(protected)>
> > > Subject: RE: Ant Task: sshexec
> > > Date: Thu, 19 May 2005 15:30:25 -0700
> > > MIME-Version: 1.0
> > > Received: from mail.apache.org ([209.237.227.199]) by
> > > MC8-F33.hotmail.com
> > > with Microsoft SMTPSVC(6.0.3790.211); Thu, 19 May 2005
> > 15:30:53 -0700
> > > Received: (qmail 43676 invoked by uid 500); 19 May 2005
> > 22:30:42 -0000
> > > Received: (qmail 43649 invoked by uid 99); 19 May 2005
> > 22:30:42 -0000
> > > Received: pass (hermes.apache.org: local policy)
> > > Received: from nbarrierb241.nike.com (HELO barrierb241.nike.com)
> > > (146.197.27.40) by apache.org (qpsmtpd/0.28) with ESMTP;
> > > Thu, 19 May 2005
> > > 15:30:41 -0700
> > > X-Message-Info: JGTYoYF78jEehhnlXDVH4HDrHvm5tdh7pTx6mUPXN6c> > >
Mailing-List: contact user-help@(protected); run by ezmlm
> > > Precedence: bulk
> > > List-Unsubscribe: <mailto:user-unsubscribe@(protected)>
> > > List-Help: <mailto:user-help@(protected)>
> > > List-Post: <mailto:user@(protected)>
> > > List-Id: "Ant Users List" <user.ant.apache.org>
> > > Delivered-To: mailing list user@(protected)
> > > X-ASF-Spam-Status: No, hits=0.0 required.0tests> > > X-Spam-Check-By
: apache.org
> > > X-Server-Uuid: BDE2CC8B-9671-48D4-9A25-CA756DA0A621
> > > X-MimeOLE: Produced By Microsoft Exchange V6.5.7226.0
> > > Content-class: urn:content-classes:message
> > > X-MS-Has-Attach:
> > > X-MS-TNEF-Correlator:
> > > Thread-Topic: Ant Task: sshexec
> > > Thread-Index: AcVcvlXvjShwcP98Rk+on/fJJyTPmgAA+Oxg
> > > X-OriginalArrivalTime: 19 May 2005 22:30:25.0284 (UTC)
> > > FILETIME=[59F92C40:01C55CC2]
> > > X-WSS-ID: 6E93CC0B2H0232912-01-01
> > > X-Virus-Checked: Checked
> > > Return-Path: user-return-50224-xiamak=hotmail.com@(protected)
> > >
> > > Separate the commands with a ;
> > >
> > > <sshexec host="somehost"
> > > username="${username}"
> > > password="${password}"
> > > command="touch somefile;touch anotherfile;touch
> > > yetanotherfile"/>
> > >
> > > -Rob A
> > >
> > > > -----Original Message-----
> > > > From: S I [mailto:xiamak@(protected)]
> > > > Sent: Thursday, May 19, 2005 3:01 PM
> > > > To: user@(protected)
> > > > Subject: Ant Task: sshexec
> > > >
> > > >
> > > > How can I get sshexec to pass it more than one command
> > at a time?
> > > >
> > > > <sshexec host="somehost"
> > > > username="${username}"
> > > > password="${password}"
> > > > command="touch somefile"/>
> > > >
> > > > I used it to run command on our unix server from my winxp
> > > > desktop. However,
> > > > it seems I have to instantiate many of these ...
> > > >
> > > > <sshexec host="somehost"
> > > > username="${username}"
> > > > password="${password}"
> > > > command="touch somefile"/>
> > > >
> > > > .. just to run 1 cmd @ a time. I tried <commnadline> + it
> > > <argument>
> > > > attribs to no avail as you guessed it. Help!
> > > >
> > > > Thanks
> > > > Steven
> > > >
> > > >
> > > >
> > > >
> > >
> >
> ---------------------------------------------------------------------
> > > > To unsubscribe, e-mail: user-unsubscribe@(protected)
> > > > For additional commands, e-mail: user-help@(protected)
> > > >
> > > >
> > > >
> > >
> > >
> > >
> >
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: user-unsubscribe@(protected)
> > > For additional commands, e-mail: user-help@(protected)
> > >
> > >
> > >
> > >
> >
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: user-unsubscribe@(protected)
> > > For additional commands, e-mail: user-help@(protected)
> > >
> > >
> > >
> > >
> >
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: user-unsubscribe@(protected)
> > > For additional commands, e-mail: user-help@(protected)
> > >
> > >
> > >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: user-unsubscribe@(protected)
> > For additional commands, e-mail: user-help@(protected)
> >
> >
> >
> >
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: user-unsubscribe@(protected)
> > For additional commands, e-mail: user-help@(protected)
> >
> >
> >
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@(protected)
> For additional commands, e-mail: user-help@(protected)
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@(protected)
> For additional commands, e-mail: user-help@(protected)
>
>
>
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@(protected)
For additional commands, e-mail: user-help@(protected)
|
|
 |
