| Perform a task for every folder from the file. | Perform a task for every folder from the file. 2007-04-30 - By mpr
Looks cool for me but:
<target description="fullGenericTokenReplacements"
name="fullGenericTokenReplacements">
<echo message="LS = [${line.separator}]"/>
<loadfile srcfile="./${src.file}" property="src.file.head"/>
<ac:for list="${src.file.head}" delimiter="${line.separator}">
<ac:sequential>
<echo message=""/>
<echo message="All files under the folder @{dir} are going to be
replaced"/>
</ac:sequential>
</ac:for>
</target>
I get
BUILD FAILED
C:\CMApplicationTools2\PackagingTools\build.xml:251: You must supply a
property name to set on each iteration in param
What to do with that?
Patrick Martin-2 wrote:
>
> Hello,
>
> I think you don't need to use antcount for that (even though this is a
> great task ... ;-))
>
> you should be able to load your file with loadfile, without filtering,
> and then use ac:for with delimiter="${line.separator}"
>
> [...]
> <loadfile srcfile="./${src.file}" property="src.file.head" />
> <ac:for list="${src.file.head}" param="dir" delimiter="${line.separator}">
> [...]
> </ac:for>
>
> Rgds,
>
> Patrick
>
> On 4/30/07, Camer38 <rembiszm@(protected)> wrote:
>>
>> It is a part of a bigger application so I cannot change the version af
>> Ant.
>> I would like to follow my fir idea , that almost work. The problem that I
>> have
>> is describe below.
>>
>>
>> I have the file user.properties and inside a paths to folders are defined
>> e.g.
>> C:\CMDOCUMENTATION4\DOCCENTER\BUILD
>> C:\CMApplicationTools2\PackagingTools
>>
>> For each folder from user.properties I need to perform a task.
>> I read a file and for each line I create a property(${prefix}) starting
>> with
>> ~~
>>
>> <loadfile srcfile="./${src.file}"
>> property="src.file.head">
>> <filterchain>
>> <tokenfilter>
>> <stringtokenizer/>
>> <countfilter
>> property="nb.matching.tokens" match="^(.+)$">
>> <!--Create property with
>> a specific name-->
>> <counteach
>> propertyprefix="${prefix}" select="\1"/>
>> </countfilter>
>> </tokenfilter>
>> </filterchain>
>> </loadfile>
>> <echo message="${nb.matching.tokens}"/>
>> <echo message="${src.file.head}"/>
>> <echoproperties prefix="${prefix}"/>
>> <ac:propertyselector property="user.files"
>> delimiter="${delimiter}"
>> match="~~(.+)" select="\1"/>
>> <echo message="${user.files}"/>
>> </target>
>>
>>
>> At the end of the target I need a list of all those properties so, I use
>> ac:propertyselector but I do not get a right result. What I received is
>> a
>> path b-to-file but without \ character.
>> Do you have an idea why?
>> Could you suggest a right solution, please?
>> counteach task is taken from:
>> http://antcount.sourceforge.net/
>>
>>
>>
>> OUTPUT
>>
>>
>> genericTokenReplacement:
>> [echo] 2
>> [echo] C:\CURAMDOCUMENTATION4\DOCCENTER\BUILD
>> [echo] C:\CuramApplicationTools2\PackagingTools
>> [echoproperties] #Ant properties
>> [echoproperties] #Mon Apr 30 14:21:19 BST 2007
>> [echoproperties] ~~C\:\\CURAMDOCUMENTATION4\\DOCCENTER\\BUILD=1
>> [echoproperties] ~~C\:\\CuramApplicationTools2\\PackagingTools=1
>> [echo]
>> C:CURAMDOCUMENTATION4DOCCENTERBUILD,C:CuramApplicationTools2PackagingTools
>>
>>
>>
>>
>>
>> Matt Benson wrote:
>> >
>> > I didn't read your error message closely enough the
>> > first time. It shows that <tokens> is taken as
>> > belonging to the ac namespace, indicating it couldn't
>> > be found in the default namespace. The example
>> > requires Ant 1.7 .
>> >
>> > -Matt
>> >
>> > --- mpr <marcin.rembisz@(protected)> wrote:
>> >
>> >>
>> >> I have followed your instructions, download the
>> >> latest AC release and build
>> >> ant-contrib.jar from source but I still get the same
>> >> error.
>> >> What do I have to do?
>> >>
>> >>
>> >>
>> >> Matt Benson wrote:
>> >> >
>> >> > I can't recall when AC last had a release; you
>> >> might
>> >> > have to build from the current source, wherein
>> >> <for>
>> >> > can handle any type that returns an Iterator.
>> >> >
>> >> > -Matt
>> >> >
>> >> > --- mpr <marcin.rembisz@(protected)> wrote:
>> >> >
>> >> >>
>> >> >> I get
>> >> >> The <antlib:net.sf.antcontrib:for> type doesn't
>> >> >> support the nested
>> >> >> "antlib:net.sf.antcontrib:tokens" element.
>> >> >>
>> >> >> What version ant-contrib.jar should I have?
>> >> >>
>> >> >>
>> >> >>
>> >> >> Matt Benson wrote:
>> >> >> >
>> >> >> >
>> >> >> > --- mpr <marcin.rembisz@(protected)>
>> >> wrote:
>> >> >> >
>> >> >> >>
>> >> >> >> Hi,
>> >> >> >>
>> >> >> >> Could you provide an example, please?
>> >> >> >>
>> >> >> >
>> >> >> > <project xmlns:ac="antlib:net.sf.antcontrib">
>> >> >> > <property name="br" value="${line.separator}"
>> >> />
>> >> >> > <echo
>> >> >> file="tokens">foo${br}bar${br}baz${br}</echo>
>> >> >> > <ac:for param="t">
>> >> >> > <tokens>
>> >> >> > <file file="tokens" />
>> >> >> > </tokens>
>> >> >> > <sequential>
>> >> >> > <echo>@@{t}=@{t}</echo>
>> >> >> > </sequential>
>> >> >> > </ac:for>
>> >> >> > </project>
>> >> >> >
>> >> >> > -Matt
>> >> >> >
>> >> >> >>
>> >> >> >>
>> >> >> >> Matt Benson wrote:
>> >> >> >> >
>> >> >> >> > The <tokens> resourcecollection should be
>> >> >> directly
>> >> >> >> > passable to <ac:for>.
>> >> >> >> >
>> >> >> >> > HTH,
>> >> >> >> > Matt
>> >> >> >> >
>> >> >> >> > --- mpr <marcin.rembisz@(protected)>
>> >> >> wrote:
>> >> >> >> >
>> >> >> >> >>
>> >> >> >> >> Hi,
>> >> >> >> >>
>> >> >> >> >> I have the file user.properties and inside
>> >> a
>> >> >> >> paths
>> >> >> >> >> to folders are defined
>> >> >> >> >> e.g.
>> >> >> >> >> C:\Application\PackagingTools4
>> >> >> >> >> C:\ApplicationTools2\PackagingTools3
>> >> >> >> >>
>> >> >> >> >> For each folder from user.properties I need
>> >> to
>> >> >> >> >> perform an Operation (task).
>> >> >> >> >>
>> >> >> >> >> What is the simplest way to do that?
>> >> >> >> >> At this moment I do:
>> >> >> >> >>
>> >> >> >> >> [CODE]
>> >> >> >> >>
>> >> >> >> >> <target
>> >> >> description="genericTokenReplacements"
>> >> >> >> >> name="genericTokenReplacement">
>> >> >> >> >> <loadfile srcfile="./${src.file}"
>> >> >> >> >> property="src.file.head">
>> >> >> >> >> <filterchain>
>> >> >> >> >> <tokenfilter>
>> >> >> >> >> <stringtokenizer/>
>> >> >> >> >> <countfilter
>> >> >> property="nb.matching.tokens"
>> >> >> >> >> match="([\w\\/]+)+">
>> >> >> >> >> <!--Create
>> property with a specific
>> >> >> name-->
>> >> >> >> >> <counteach
>> propertyprefix="${prefix}"
>> >> >> >> >> select="\1"/>
>> >> >> >> >> </countfilter>
>> >> >> >> >> </tokenfilter>
>> >> >> >> >> </filterchain>
>> >> >> >> >> </loadfile>
>> >> >> >> >> <echo message="${src.file.head}"/>
>> >> >> >> >> <echoproperties prefix="${prefix}"/>
>> >> >> >> >> <ac:propertyselector
>> >> property="user.files"
>> >> >> >> >> delimiter="${delimiter}"
>> >> >> >> >> match="~~(.+)" select="\1"/>
>> >> >> >> >> <echo message="${user.files}"/>
>> >> >> >> >> <ac:for list="${user.files}" param="dir">
>> >> >> >> >> <ac:sequential>
>> >> >> >> >> <echo message="All files under
>> the
>> >> folder
>> >> >> >> @{dir}
>> >> >> >> >> are going to be
>> >> >> >> >> replaced"/>
>> >> >> >> >> <--! OPERATION here-->
>> >> >> >> >> </ac:sequential>
>> >> >> >> >> </ac:for>
>> >> >> >> >> </target>
>> >> >> >> >>
>> >> >> >> >> [/CODE]
>> >> >> >> >>
>> >> >> >> >> but I have noticed the problem.
>> >> >> >> >> <ac:propertyselector property="user.files"
>> >> >> >> >> delimiter="${delimiter}"
>> >> >> >> >> match="~~(.+)" select="\1"/>
>> >> >> >> >> trim out (eat) character "\" so i get full
>> >> >> path
>> >> >> >> to
>> >> >> >> >> folder whit out "\"
>> >> >> >> >>
>> >> >> >> >> Could you suggest to solve it?
>> >> >> >> >> Thank you in advance,
>> >> >> >> >> MR
>> >> >> >> >>
>> >> >> >> >> --
>> >> >> >> >> View this message in context:
>> >> >> >> >>
>> >> >> >> >
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >
>> >>
>> >
>> http://www.nabble.com/Perform-a-task-for-every-folder-from-the-file.
-tf3658328.html#a10221352
>> >> >> >> >> Sent from the Ant - Users mailing list
>> >> archive
>> >> >> at
>> >> >> >> >> Nabble.com.
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >
>> >>
>> > ---------------------------------------------------------------------
>> >> >> >> >> To unsubscribe, e-mail:
>> >> >> >> >> user-unsubscribe@(protected)
>> >> >> >> >> For additional commands, e-mail:
>> >> >> >> >> user-help@(protected)
>> >> >> >> >>
>> >> >> >> >>
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >>
>> >> __________________________________________________
>> >> >> >> > Do You Yahoo!?
>> >> >> >> > Tired of spam? Yahoo! Mail has the best
>> >> spam
>> >> >> >> protection around
>> >> >> >> > http://mail.yahoo.com
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >
>> >>
>> > ---------------------------------------------------------------------
>> >> >> >> > To unsubscribe, e-mail:
>> >> >> >> user-unsubscribe@(protected)
>> >> >> >> > For additional commands, e-mail:
>> >> >> >> user-help@(protected)
>> >> >> >> >
>> >> >> >> >
>> >> >> >> >
>> >> >> >>
>> >> >> >> --
>> >> >> >> View this message in context:
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >
>> >>
>> >
>> http://www.nabble.com/Perform-a-task-for-every-folder-from-the-file.
-tf3658328.html#a10221747
>> >> >> >> Sent from the Ant - Users mailing list archive
>> >> at
>> >> >> >> Nabble.com.
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >>
>> >> >
>> >>
>> > ---------------------------------------------------------------------
>> >> >> >> To unsubscribe, e-mail:
>> >> >> >> user-unsubscribe@(protected)
>> >> >> >> For additional commands, e-mail:
>> >> >> >> user-help@(protected)
>> >> >> >>
>> >> >> >>
>> >> >> >
>> >> >> >
>> >> >> >
>> >> __________________________________________________
>> >> >> > Do You Yahoo!?
>> >> >> > Tired of spam? Yahoo! Mail has the best spam
>> >> >> protection around
>> >> >> > http://mail.yahoo.com
>> >> >> >
>> >> >> >
>> >> >>
>> >> >
>> >>
>> > ---------------------------------------------------------------------
>> >> >> > To unsubscribe, e-mail:
>> >> >> user-unsubscribe@(protected)
>> >> >> > For additional commands, e-mail:
>> >> >> user-help@(protected)
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >>
>> >> >> --
>> >> >> View this message in context:
>> >> >>
>> >> >
>> >>
>> >
>> http://www.nabble.com/Perform-a-task-for-every-folder-from-the-file.
-tf3658328.html#a10222424
>> >> >> Sent from the Ant - Users mailing list archive at
>> >> >> Nabble.com.
>> >> >>
>> >> >>
>> >> >>
>> >> >
>> >>
>> > ---------------------------------------------------------------------
>> >> >> To unsubscribe, e-mail:
>> >> >> user-unsubscribe@(protected)
>> >> >> For additional commands, e-mail:
>> >> >> user-help@(protected)
>> >> >>
>> >> >>
>> >> >
>> >> >
>> >> > __________________________________________________
>> >> > Do You Yahoo!?
>> >> > Tired of spam? Yahoo! Mail has the best spam
>> >> protection around
>> >> > http://mail.yahoo.com
>> >> >
>> >> >
>> >>
>> > ---------------------------------------------------------------------
>> >> > To unsubscribe, e-mail:
>> >> user-unsubscribe@(protected)
>> >> > For additional commands, e-mail:
>> >> user-help@(protected)
>> >> >
>> >> >
>> >> >
>> >>
>> >> --
>> >> View this message in context:
>> >>
>> >
>> http://www.nabble.com/Perform-a-task-for-every-folder-from-the-file.
-tf3658328.html#a10251022
>> >> Sent from the Ant - Users mailing list archive at
>> >> Nabble.com.
>> >>
>> >>
>> >>
>> > ---------------------------------------------------------------------
>> >> To unsubscribe, e-mail:
>> >> user-unsubscribe@(protected)
>> >> For additional commands, e-mail:
>> >> user-help@(protected)
>> >>
>> >>
>> >
>> >
>> > __________________________________________________
>> > Do You Yahoo!?
>> > Tired of spam? Yahoo! Mail has the best spam protection around
>> > http://mail.yahoo.com
>> >
>> > ---------------------------------------------------------------------
>> > To unsubscribe, e-mail: user-unsubscribe@(protected)
>> > For additional commands, e-mail: user-help@(protected)
>> >
>> >
>> >
>>
>> --
>> View this message in context:
>> http://www.nabble.com/Perform-a-task-for-every-folder-from-the-file.
-tf3658328.html#a10253485
>> Sent from the Ant - Users mailing list archive at Nabble.com.
>>
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: user-unsubscribe@(protected)
>> For additional commands, e-mail: user-help@(protected)
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: user-unsubscribe@(protected)
> For additional commands, e-mail: user-help@(protected)
>
>
>
--
View this message in context: http://www.nabble.com/Perform-a-task-for-every
-folder-from-the-file.-tf3658328.html#a10254747
Sent from the Ant - Users mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: user-unsubscribe@(protected)
For additional commands, e-mail: user-help@(protected)
|
|
 |
